Panasonic KX-NCP1000 Programming Manual page 28

3.1.6 Calling Party
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Header Type
Specifies the header of the SIP message in which the caller information is stored.
Default
From Header
Value Range
From Header, P-Preferred-Identity Header
From Header—User Part
Specifies the value to be stored in the username part of the SIP-URI of the From header.
Default
User Name
Value Range
User Name, Authentication ID, PBX-CLIP
From Header—SIP-URI
Specifies the complete SIP-URI address of the From header. The configuration in From Header—User Part
will be invalid if this parameter is set.
Default
Not stored.
Value Range
Max. 100 characters
P-Preferred-Identity Header—User Part
Specifies the value to be stored in the username part of the SIP-URI of the P-Preferred-Identity header.
Default
User Name
Value Range
User Name, Authentication ID, PBX-CLIP
28 Programming Manual for Virtual SIP CO Line Card Document Version 2009-12