Sounds Settings; Picture Format; Tv Scart Mode; Video Scaling - TechniSat digit mf4-s e Operating Instructions Manual

Hide thumbs Also See for digit mf4-s e:
Table of Contents

Advertisement

6.3 Sound settings
To optimise your digital receiver for use with your television set, you may make further settings
in the menu Sound settings.
> Press the Menu key to display the Main Menu.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK. The sub-menu Settings will be displayed.
> Now use the arrow keys up/down to mark the line Sound Settings.
> Confirm by pressing OK. The menu Sound Settings will be displayed.
> Use the arrow keys up/down to move the marker within the menu, and to change the
individual items as indicated. When selecting a menu item, please note any messages
displayed on screen. The following settings may be made :
6.3.1 Picture settings
Use the arrow keys left/right to set the picture format appropriate for your TV set:
.>
4:3 or 16:9. This function provides the automatic adjustment of the picture format for your
television set.

6.3.2 TV SCART mode

>
Use the arrow keys left/right right to set the parameter according to your TV set, to
FBAS, RGB or S-Video. For standard sets, select FBAS.

6.3.3 Video scaling

>
In this line, use the arrow keys left/right to select your preferred Video scaling
setting.

6.4 Antenna configuration

When you have completed adjusting your digital receiver to your individual preferences, you
may, if required, still have to set your digital receiver in accordance with your antenna. In the
menu Antenna configuration you will find the satellites selected by the installation
assi stant. If the installation assistant was terminated prematurely, the satellite positions
ASTRA and EUTELSAT are pre-programmed.
If you wish to receive other satellites, or are using a different type of LNB, adjust your digital
receiveras follows for your requirements:
>
Press the Menu key to display the Main Menu.
>
Use the arrow keys up/down to mark the line Settings.
>
Confirm by pressing OK. The menu Settings will be displayed.
>
Now use the arrow keys up/down to mark the line Antenna configuration.
Confirm by pressing OK. The menu Antenna configuration
>
The following settings can be made in this sub-menu: will be displayed.
15

Advertisement

Table of Contents
loading

Table of Contents