Table of Contents
Advertisement
Solid Disk Range Instillation Instructions
IMPORTANT: Save these instructions for the local electrical inspector's use.
Fig. 1
Minimum
dimensions
and walls above cooktop
See Figures 1 and 2 for all rough-
in and spacing dimensions. These
dimensions must be met for safe
use of your range. The location of
the electrical outlet may be changed
as needed, but electricity to the
range can be disconnected at the
outlet without moving the range if
the outlet is in the suggested
location (remove lower drawer).
Preparation
Remove all tape and packaging.
Be sure to remove clear plastic film
that covers some chrome parts
(around glass oven doors, side trim).
. Take the accessory pack out of
the oven.
Check to be sure that no range
parts have come loose during
shipping.
32
between
cooktop
. To reduce the risk of burns or fire
when reaching over hot surface
elements, cabinet storage space
above the cooktop should be
avoided. If cabinet storage space is
to be provided above the cooktop,
the risk can be reduced by installing
a range hood that sticks out at least
5" beyond the front of the cabinets.
Cabinets installed above a cooktop
may be no deeper than 13".
Protect Your Floor
Your range, like many other
household items, is heavy and
can settle into soft floor coverings
such as cushioned vinyl or
carpeting. When moving the range
on this type of flooring, use care,
and it is recommended that these
simple and inexpensive instructions
be followed.
2
Fig.
.
Roughed-in dimensions
clearance (flush) at the back wall
and side walls of the range if the
front edges of the range side panels
stick out beyond the cabinet fronts
at least 1/4". See Figure 2.
The range should be installed on
a sheet of plywood (or similar
material) as follows: When the
the range, the area that the range
will rest on should be built up with
plywood to the same level or higher
than the floor covering. This will
allow the range to be moved for
cleaning or servicing.
Advertisement
Table of Contents
