Table of Contents
Advertisement
Electronic Controh
Indicator
The word "ON" is displayed
when BAKE or BROIL button is
energized. It goes out when oven
CANCEL button is pushed or when
oven shuts off automatically.
The oven operation is controlled
electronically. The following
instructions tell you how to operate
the electronic controls.
To Set the Clock
1. Push CLOCK button.
2. Turn SET knob to correct time
of day. Clock is now set. The clock
must be set to the correct time of
day for accurate automatic oven
timing operations.
16
To Set the
Minute/Second Timer
1. Push TIMER button.
2. Turn SET knob to desired
amount of time (up to 9 hours and
59 minutes). The Minute/Second
Timer will begin to count down
within a few seconds.
3. When time isup, the End-of-Cycle
Tone (3 long beeps) will sound and
the display will again show the time
of day.
Note: The Minute/Second Timer is
a reminder only and will not operate
the oven.
You can use the Minute/Second
Timer whether or not the oven is
being used. The Minute/Second
Timer does not interfere with oven
operations.
To Cancel the Timer
Push and hold TIMER button for
three seconds. This will clear the
Minute/Second Timer function.
To Bake
1. Push BAKE button.
2. Turn SET knob until desired
temperature is displayed.
A one-second beep will sound
when the oven has preheated to and
stabilized at selected temperature.
3. When finished baking, push
oven CANCEL button.
Note: To recall what temperature
you have selected while the rising
temperature is being shown, push
and hold the BAKE button. The
selected temperature will be shown
while you hold the BAKE button.
The actual oven temperature will
be shown after a few seconds.
You can push the CLOCK button
to display time of day without
canceling the oven operation.
To Broil
1. Push BROIL button.
2. Turn SET knob until your
choice of HI BROIL or LO BROIL
is visible in the display.
When finished broiling, push the
oven CANCEL button.
Advertisement
Table of Contents
