Making Calls - Comdial Impact 8024S User Manual

1. Press "HOLD" to place the call on hold at your station. Or,
2. Select "ANS" to return to the call.
3. Select "SEND" to retry the transfer.
Monitor Status of Another Telephone
Look at the BLF light next to the Direct Station Select (DSS/BLF) button.
Off = Station is idle
Flashing = Station has an incoming call
On = Station is busy

Making Calls

Manually:
1. Press "INTERCOM"
2. Select a line and dial the number.
Speed Dialing:
1. Press the programmed speed dial button. If you want the alternate
number stored on that buttons, press "SHIFT" at the same time.
Redialing
Redial Last Number:
1. Press "SPEAKER" or hang up to disconnect current ringing or busy
tone.
2. Dial "#".
Use automatic redial features to redial a busy or unanswered number
while you are on a call:
1. Select "ARDL" or press the automatic redial button programmed by
your installer.
The system will dial the number until you cancel the feature or after a
specific number of tries (set by your installer). The automatic redial light
will flash between redials and will be steady during redialing.
Storing a number you've just dialed:
1. Select "SAVE" and press an unused programmable button.
Store a number while you are on a call (not available on all systems):
1. Press the programmed "SAVE NUMBER REDIAL" button twice.
2. Following the prompt, dial the number you wish to save. Your call will
not be interrupted.