Installing A Security Cable; Replacing The Air Baffle - IBM IntelliStation M Pro User Manual

Installing a security cable

To help prevent hardware theft, you can thread a security cable through the cable
loop on the rear of the computer. After you add the security cable, make sure that it
does not interfere with other cables that are connected to the computer.
Before you begin, obtain the following items:
v A security cable
v A lock, such as a combination lock or padlock
To install a security cable, complete the following steps:
1. Thread the cable through the cable loop and around an object that is not part of
2. Fasten the cable ends together with a lock. Make sure that the cable does not

Replacing the air baffle

To replace the air baffle, complete the following steps:
1. Place the air baffle directly over the front fan unit.
2. Press the air baffle down until it snaps in place over the front fan unit. When the
64
IBM IntelliStation M Pro Type 6218: User's Guide
or permanently secured to the building structure or foundation and from which
the cable cannot be removed.
interfere with other cables that are connected to the computer.
Cable loop
air baffle is correctly seated, the right edge of the air baffle rests on the left
edge of the heat sink.