Creating An Ibm Enhanced Diagnostics Diskette Or Cd In Windows - IBM IntelliStation M Pro User Manual

2. Use Windows Explorer to display the directory structure of the hard disk.
3. Open the c:\ibmtools folder.
4. Double-click rrdisk.bat and follow the instructions on the screen.
To create a recovery-repair diskette from the Product Recovery program on the
hard disk, complete the following steps:
1. Shut down the operating system and turn off the computer.
2. Wait for at least 5 seconds, then press and hold the F11 key while you restart
3. Use one of the following procedures:
4. From the Product Recovery main menu, use the arrow keys to select System
5. Use the arrow keys to select Create a Recovery Repair diskette, and then
6. Follow the instructions on the screen.
See "Creating an IBM Enhanced Diagnostics Diskette or CD in Windows" for
information about how to create an IBM Enhanced Diagnostics diskette.

Creating an IBM Enhanced Diagnostics Diskette or CD in Windows

Note: To create and use a diskette or CD, you must have a diskette, CD-RW, or
The IBM Enhanced Diagnostics diskette is a self-starting diagnostics diskette that is
used to test hardware components in the computer. You can create only an IBM
Enhanced Diagnostics diskette from the Product Recovery program. You can create
an IBM Enhanced Diagnostics diskette or CD from the World Wide Web.
To create an IBM Enhanced Diagnostics diskette from the Product Recovery
program partition on the hard disk, complete the following steps:
1. Restart the computer and watch the monitor.
2. When the message To start the Product Recovery Program, Press F11
3. Select System utilities.
4. Select Create IBM Enhanced Diagnostics Diskette.
5. Follow the instructions on the screen.
To create an IBM Enhanced Diagnostics diskette from the World Wide Web,
complete the following steps:
1. Go to http://www.ibm.com/.
2. Click Support & downloads.
3. Click Search technical support.
4. In the Enter keyword(s) field, type diagnostics 6218, and click Submit.
14
IBM IntelliStation M Pro Type 6218: User's Guide
the computer. When a menu appears, release the F11 key.
v If a menu is displayed that gives you the opportunity to select an operating
system, use the arrow keys to select the operating system that is currently
installed, press Enter, and then continue with the next step.
v If an operating-system menu is not displayed, continue with the next step.
utilities, and then press Enter.
press Enter.
DVD/CD-RW combo drive installed in the computer. To enable a USB
diskette drive to work, you must disable the legacy diskette drive function in
the Configuration/Setup Utility program (click Start Options → Disable
Internal Floppy Support).
appears, quickly press F11.