Creating An Ibm Enhanced Diagnostics Diskette In Windows - IBM IntelliStation Z Pro 6223 Installation Manual

the Product Recovery program. For more information about using this diskette, see
the User's Guide on the IBM IntelliStation Documentation CD.
You can use one of the following methods to create a recovery-repair diskette In
Windows:
v Create a diskette from the c:\ibmtools directory
v Create a diskette from the Product Recovery program partition
Complete the following steps to create a recovery-repair diskette from the
c:\ibmtools directory:
1. Start the computer and operating system.
2. Use Windows Explorer to display the directory structure of the hard disk.
3. Open the c:\ibmtools folder.
4. Double-click rrdisk.bat and follow the instructions on the screen.
Complete the following steps to create a recovery-repair diskette from the Product
Recovery program on the hard drive partition:
1. Shut down the operating system and turn off the computer.
2. Wait for at least 5 seconds; then, press and hold the F11 key while you restart
3. Use one of the following procedures:
4. From the Product Recovery Main menu, use the arrow keys to select System
5. Use the arrow keys to select Create a Recovery Repair diskette, and then
6. Follow the instructions on the screen.
See "Creating an IBM Enhanced Diagnostics Diskette in Windows" for information
about how to create an IBM Enhanced Diagnostics diskette.

Creating an IBM Enhanced Diagnostics Diskette in Windows

Note: To create and use a diskette, you must add a diskette drive to your
computer. To enable a USB diskette drive, follow these steps:
1. Enable the Legacy USB Support option under the Startup Option menu
2. Set your removable media device as the first startup device.
3. Select the removable media device you want to boot from and move it to the
The IBM Enhanced Diagnostics diskette is a self-starting diagnostics diskette that
you can use to test hardware components in your computer. Use one of the
following methods to create a startable IBM Enhanced Diagnostics diskette.
Complete the following steps to create an IBM Enhanced Diagnostics diskette from
the Product Recovery program on the hard drive partition:
1. Restart the computer and watch the monitor.
56
IntelliStation Z Pro Type 6223: Installation Guide
the computer. When a menu appears, release the F11 key.
v If a menu is displayed in which you can select an operating system, use the
arrow keys to select the operating system that is currently installed, press
Enter, and then continue with the next step.
v If an operating system menu is not displayed, continue with the next step.
utilities, and then press Enter.
press Enter.
choice in the Configuration/Setup Utility program.
top of the Removable Devices list.