Casablanca bel-air Manual page 10

Table of Contents

Wiring (continued)

www.CasablancaFanCo.com

1.888.227.2178

Before

After

After removing the switch plate

Using orange wire connectors,

Insert the wall control into

Install the cover plate using a

the outlet box and secure the

cover, remove all wiring from

connect the two black wires

Phillips Head screwdriver to

the switch.

(ungrounded) from the outlet

two screws using a Phillips

secure the two cover plate screws.

box. Also connect the two green

head screwdriver.

or bare wires (grounding) from

the outlet box with the grounding

wire from the wall control.

This device complies with Part 15 of the FCC Rules. Operation is subject to

Push all connections to the back of the switch box. Spread the

the following conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

wires apart, with the grounded wires on one side of the switch box

and the ungrounded wires on the other side of the switch box.

interference that may cause undesired operation.

Table of Contents