Service Interval Chart - Toro 07367 Operator's Manual

Maintenance Service
Interval
Every 200 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Yearly

Service Interval Chart

Maintenance Procedure
• Torque the front and rear wheel nuts
• Inspect opening on filter.
• Change the air cleaner filter. (more frequently in dusty or dirty conditions)
• Change engine oil and filter.
• Inspect the constant velocity boot for cracks, holes, or a loose clamp (four wheel
drive models only).
• Check the adjustment of the shift cables.
• Check the adjustment of the high–low cable.
• Check the adjustment of the differential lock cable.
• Check the adjustment of the parking brake.
• Check the adjustment of the brake pedal.
• Check condition and tension of the alternator belt.
• Check the adjustment of the clutch pedal.
• Inspect the service and parking brakes.
• Inspect or replace the spark plugs.
• Replace the fuel filter.
• Check the fuel lines and connections.
• Check the front wheel alignment.
• Visually inspect the brakes for worn brake shoes.
• Change the front differential oil (four wheel drive models only).
• Change the hydraulic fluid and clean the strainer.
• Replace the hydraulic filter.
• Change the high flow hydraulic oil and filter (TC Models only).
• Change the brake fluid.
• Drain/flush the fuel tank.
• Flush/replace the coolant system fluid.
• Complete all yearly maintenance procedures specified in the Engine Operator's
Manual.
Figure 31
35