Yamaha RAPTOR YFM125RA Service Manual page 61

1. Neutral indicator light
2. Main switch lead coupler
3. Main switch lead
4. Headlight lead
5. Main switch
6. Front brake light switch lead
7. Throttle cable
8. Air vent hose
9. Clutch switch lead
10.Handlebar switch lead
11.Parking brake cable
12.Clutch cable
13.Front fender
14.Clamp
15.Rectifier/regulator lead
A. Install the indicator light as shown in the
illustration.
B. Connect the main switch lead coupler on
the front fender.
C. Pass the headlight lead and main switch
lead through the guide of the front fender. It
is allowable if the open-wired lead is posi-
tioned on the guide or clamp.
D. Pass the front brake light switch lead and
throttle cable through the guide.
E. Insert the air vent hose into the front
fender.
F. Pass the clutch switch lead, handlebar
switch lead, parking brake cable, and
clutch cable through the guide of the front
fender. Pass the clutch switch lead and
handlebar switch lead behind the clutch
cable and parking brake cable.
G. Pass the clutch switch lead and handlebar
switch lead through the guide of the front
fender and then connect them on the front
fender.
2-38
CABLE ROUTING