Yamaha RAPTOR YFM125RA Service Manual page 55

1. Rear brake reservoir
2. Rear brake light switch
3. Clip
4. Rear brake reservoir hose
5. Rear brake master cylinder
6. Parking brake cable
7. Parking brake cable adjusting nut
8. Brake hose
9. Rear brake caliper
10.Swingarm
A. Make sure that the end of the clip is facing
downward.
B. Set the rear brake reservoir hose with the
positioning yellow paint mark pointing
down.
C. Install the rear brake hose in the direction
shown in the illustration.
D. Insert the rear brake hose until it contacts
the projection.
E. Install the rear brake reservoir hose in the
direction shown in the illustration.
F. Install the rear brake reservoir hose, mak-
ing sure to face the white paint mark out-
ward.
G. Make sure that the end of the clip is facing
outward.
H. Insert the rear brake reservoir hose until it
contacts the projection.
I. When installing the rear brake hose, make
sure that the metal part on the rear brake
hose is touching the stopper of the rear
caliper.
J. 64–68 mm (2.52–2.68 in)
2-32
CABLE ROUTING