General Maintenance And Lubrication Chart - Yamaha RAPTOR YFM125RA Service Manual

EAS2PA1302

GENERAL MAINTENANCE AND LUBRICATION CHART

TIP
• For ATVs not equipped with an odometer or an hour meter, follow the month maintenance inter-
vals.
• For ATVs equipped with an odometer or an hour meter, follow the km (mi) or hours maintenance
intervals. However, keep in mind that if the ATV isn't used for a long period of time, the month
maintenance intervals should be followed.
• Items marked with an asterisk should be performed by a Yamaha dealer as they require special
tools, data and technical skills.
NO. ITEM
1 Air filter element
2 * Clutch
3 * Front brake
4 * Rear brake
5 * Brake hoses
6 * Parking brake
7 * Wheels
8 * Tires
9 * Wheel hub bearings
1
* Swingarm pivots
0
1 Upper and lower arm
*
1 pivots
1
Drive chain
2
1
* Drive chain rollers
3
1
* Chassis fasteners
4
1 Shock absorber
*
5 assemblies
1
* Steering shaft
6
1
* Steering system
7
1
* Engine mount
8
1
Engine oil
9
2 Moving parts and
*
0 cables
CHECK OR MAINTENANCE
JOB
• Clean and replace if necessary.
• Check operation and adjust if necessary.
• Check operation and correct if necessary.
• Check fluid level and ATV for fluid leakage, and correct if
necessary.
• Replace brake pads.
• Check operation and correct if necessary.
• Check fluid level and ATV for fluid leakage, and correct if
necessary.
• Replace brake pads.
• Check for cracks or other damage, and replace if neces-
sary.
• Replace.
• Check operation and adjust if necessary.
• Check runout and for damage, and replace if necessary.
• Check tread depth and for damage, and replace if neces-
sary.
• Check air pressure and balance, and correct if necessary.
• Check for looseness or damage, and replace if neces-
sary.
• Check operation and for excessive play, and replace
bearings if necessary.
• Lubricate with lithium-soap-based grease.
• Lubricate with lithium-soap-based grease.
• Check chain slack and adjust if necessary.
• Check rear wheel alignment and correct if necessary.
• Clean and lubricate.
• Check for wear and replace if necessary.
• Make sure that all nuts, bolts, and screws are properly
tightened.
• Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
• Lubricate with lithium-soap-based grease.
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
• Check for cracks or other damage, and replace if neces-
sary.
• Change.
• Check ATV for oil leakage, and correct if necessary.
• Lubricate.
PERIODIC MAINTENANCE
month 1
Whichever
km 320
comes first
(mi) (200)
hours 20
Every 20–40 hours (more often in wet or
√
√
√
√
√
√
√
√
√
√
√
3-2
INITIAL EVERY
3 6 6 12
1300 2500 2500 5000
(800) (1600) (1600) (3200)
80 160 160 320
dusty areas)
√ √ √
√ √ √ √
Whenever worn to the limit
√ √ √ √
Whenever worn to the limit
√ √ √ √
Every 4 years
√ √ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √ √
√ √ √
√ √ √ √
√ √ √
√ √ √
√ √ √ √
√ √ √
√ √ √
√ √ √ √