Table of Contents
Advertisement
2.5.4 Alarm Detection Recording
•
If after-motion detection recording and before-motion detection recording overlap, a continuous image
is recorded.
Example: You have set images to be recorded 5 seconds before and after motion detection.
5 sec.
•
Detection notifications and images captured at detections can be sent to specified E-mail addresses.
(® Page 19)
2.5.4 Alarm Detection Recording
When the signal of an alarm that is attached to the camera is detected, alarm recording starts.
Set the alarm detection method for each camera. (® Page 36)
Alarm recording can only be set up for cameras that connect in JPEG format. If the MPEG-4/H.264 format is
selected, change the format to JPEG. (® Page 28)
1.
From the multi-monitoring window, select a camera for alarm detection recording.
•
A green frame is displayed around the selected camera.
2.
Click
the menu displayed.
•
Starts alarm detection recording by the selected camera.
•
To stop recording from a camera, select the camera, click
Recording]/[Stop Alarm 2 Detection Recording] from the menu which is displayed.
Note
•
Recording will not stop even if you close the operating window with
When
•
You can set the camera to record a certain number of seconds before and after an alarm signal is
detected.
To ensure proper operation, test the alarm recording.
•
Alarm detection commands can be selected and executed. (® Page 36)
•
If after-alarm detection recording and before-alarm detection recording overlap, a continuous image is
recorded.
Example: You have set images to be recorded 5 seconds before and after alarm detection.
5 sec.
•
If the alarm detection before and after Alarm 1 and Alarm 2 recording overlaps, images are saved as
separate files.
•
Detection notifications and images captured at detections can be sent to specified E-mail addresses.
(® Page 19)
78
Operating Instructions
5 sec.
motion is detected
1 image is recorded.
and select [Start Alarm 1 Detection Recording]/[Start Alarm 2 Detection Recording] from
is displayed in the notification area, the recording software is running. (® Page 10)
Alarm signal
is detected
1 image is recorded.
motion is detected
5 sec.
5 sec.
5 sec.
5 sec.
Alarm signal
is detected
, and select [Stop Alarm 1 Detection
.
5 sec.
Advertisement
Table of Contents
