Panasonic BB-HNP17A Operating Instructions Manual page 47

•
Execute commands for each detection.
When you select [Execute once only at the time of recording start]
•
Execute commands only at the start of detection recording.
When you select [Execute every definite interval of time from recording start to end]
•
The command execution interval can be set by the number of seconds. After detection, the command will
not be executed even if detection is made within the execution interval.
Execution interval
Execution interval
Pop-up Duration
When [Continue till the next new pop-up.] is selected
The pop-up image is updated when motion is detected.
Detection
Pop-up display
When [Specified time] is selected
The pop-up image will not update during the specified period even if motion is detected. If no motion is detected
in the specified period, the pop-up image display will be deleted.
Specified time
Detection
Pop-up display
Execute commands
Execute commands
Execution interval
Execute commands
Detection Detection
Pop-up display Pop-up display
Specified time
Detection
Detection Detection
Pop-up display
Execution interval
Specified time
Detection
Pop-up display
2.2 Setting Cameras
Operating Instructions 47