Starting Or Closing This Software; Starting Operation Window - Panasonic BB-HNP17A Operating Instructions Manual

1.2 Starting or Closing This Software

This software starts automatically when you boot up the PC.
•
is displayed in the notification area while this software is running.
PC screen
Start
Note
•
When using the software on Windows 7 the
Click the ( ) in the notification area to display the
To always display
[Customize] and configure [Show icon and notifications] for the software.
•
To not start this software automatically when booting up the PC, right-click
bootup] from the menu.

1.2.1 Starting Operation Window

Double-click
•
Operation window of this software is displayed.
Note
•
You can also start the operation window through the following procedures.
– From the [Start] menu, select [All Programs] ® [Network Camera Recorder with Viewer Software
Ver. 4] ® [Network Camera Recorder with Viewer Software Ver. 4].
–
Start Explorer and double click the destination [Ncr4] folder [ncr4.exe] where this software will be
installed.
•
This software cannot be started multiple times simultaneously.
Displayed in the
notification area.
, click the ( ) in the notification area. From the displayed menu select
on the desktop to start this software.
notification area
is not displayed in the notification area.
.
1.2.1 Starting Operation Window
and uncheck [Start on
Operating Instructions 9