Table of Contents
Advertisement
5.3 Error Message List
Message
Conversion Interval should be between 1
and (start time - end time (seconds)).
Conversion Interval should be between 1
and 3600.
The recorded images could not be found.
Search the recorded images and try again.
A write error has occurred.
Conversion is canceled.
Cannot convert images that are being
recorded.
The data could not be converted to WAV
format. The recorded images do not have
any audio data.
To use this feature, license registration is
essential. Perform license registration.
The copy operation was canceled.
Conversion is complete.
You cannot convert the recorded images
to a single JPEG file.
Copying has completed successfully.
Deleting
The recorded images cannot be deleted
during recording. Stop the recording, and
try again.
The selected recorded image does not
exist. Try searching again.
Do you want to delete the selected
images?
Some recorded images cannot be deleted.
Please try again.
Change the keyword
Keyword 1 should be 40 characters or
less.
180
Operating Instructions
Cause and Remedy
•
The number is larger than the time period between the start
time and end time, or the space was blank.
→
Conversion Interval should be between 1 and (start time
- end time (seconds)).
•
The image is recorded for more than 1 hour, but the
conversion interval is not between 1 and 3600.
→
Conversion Interval should be between 1 and 3600.
•
In JPEG conversion, when you have attempted conversion
even when there are no recorded images.
→
Search the recorded images and try again.
•
An error has occurred in conversion or the converted file has
been opened in another application.
→
Search the recorded images and try again.
→
Close other applications and try again.
•
You clicked cancel button while converting the image.
•
You cannot convert a recorded image that does not last
more than one minute from when it started recording.
•
You cannot convert the recorded image into WAV format
because the recorded images do not have any audio data.
•
Some features cannot be used without license registration
(JPG, MPG, WAV, ASF, AVI Conversion, Make Copy).
→
Perform license registration.
•
You clicked cancel button while copying the image.
•
Conversion has completed successfully.
•
When converting multiple recorded images to JPEG format,
you cannot use [To one file].
•
Copying has completed successfully.
•
You are deleting images during recording.
→
Stop the recording and try again.
•
You manually deleted recorded images.
→
Try searching again.
•
The recorded images are set to be deleted.
→
The selected recording images will be deleted.
•
The file has been opened in another application.
→
Close other applications and try again.
•
The Keyword1 was more than 40 characters.
→
Enter Keyword 1 within 40 characters.
Advertisement
Table of Contents
