Table of Contents
Advertisement
2.2 Setting Cameras
Note
•
The contents of the sent E-mail is comprised of: the camera name, detection type, and the time stamp.
Time stamps are displayed as [year/month/day hour:minute:second].
For example, 2010 January 1, 15:20:55 is shown as [2010/01/01 15:20:55].
Setting shock detection recording (only for cameras with shock detection
feature)
Starts recording with shock detection recording when the camera detects a shock.
The recording time for shock detection recording (and so on) is set using this software.
Note
•
Only cameras with the [Data Format] set to [JPEG] on the [Image Settings] page can be configured.
(® Page 28)
An error message will be displayed when set in [MPEG-4], [H.264].
The data format will change to [JPEG] when you click [OK].
When the data format is set as [H.264]
•
Set the shock detection sensitivity on the settings page for the camera.
Shock Detection Page
42
Operating Instructions
Advertisement
Table of Contents
