Table of Contents
Advertisement
Setting
User Name/Password
Proxy
Destination Folder
Video Channel Settings
Note
•
The default camera name is [New Camera], followed by a number.
The number is generated automatically. Default values are used for the other settings.
If the camera has security settings enabled (authentication setting),
enter the administrator user name and password for the camera. (Enter
the alphanumeric characters. 4 to 32 characters.)
If you set a general or unregistered user name and password, this
software may not work properly.
•
Password are encrypted when saved.
•
Only Basic authentication can be used as an authentication method.
Digest authentication is not supported.
If the camera uses a proxy server, select [Used]. (Cameras that are
registered using an IPv6 address cannot be used with a proxy server.)
Set up the proxy server before using a proxy. (® Page 18)
Specify the recorded image's destination folder for individual
cameras.
Click [Browse] and designate the destination folder when changing the
destination.
•
Due to the operating system specifications (UAC: User Account
Control) of Windows Vista and Windows 7, when [Program Files] of
the start-up drive is specified in the destination folder, recorded
images are automatically saved in separate folders. When this
software is installed to C:\Program Files\Panasonic\NCR4 in
Windows Vista and Windows 7, folders are saved to: C:\User\(user
name)\AppData\Local\VirtualStore\Program Files\Panasonic
\Ncr4\ncrdata. Do not directly set the [AppData] folder as the
destination folder.
After executing [Check the Camera Function], [Video Channel
Settings] is only displayed when network video encoders, or 360°
network cameras that have image capture mode set to quad streams
are recognized.
In the [Video Channel Settings] you can select which video channel is
used.
2.1 Registering the Camera
Description
Operating Instructions
25
Advertisement
Table of Contents
