Home Channel Memory - Yaesu VX-6E Operating Manual

A special one-touch "HOME" channel is available for each of operating bands, to allow
quick recall of a favorite operating frequency on each band.
Home Channel storage is simple to accomplish:
1. Change the setting of Set Mode Item 28: HM
already set to this option (see page 95).
2. Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
3. Press and hold in the [ F/W ] key for one second.
4. While the memory channel number is blinking, just press the [ HM/RV ( EMG ) R/H ]
key. The frequency and other data (if any) will now be stored in the special HOME
channel register.
5. You may repeat this process on the other operating bands.
6. T o r e c a l l t h e H O M E c h a n n e l , p r e s s t h e
[ HM/RV ( EMG ) R/H ] key momentarily while operating either
in the VFO or MR mode.
The UHF HOME channel is
the one used during "Emer-
gency Channel Operation."
See page 62 for details regarding this
feature.
VX-6E O
PERATING
M M
EMORY
HOME C
HANNEL
M
ANUAL
ODE ( R
EGULAR
M
EMORY
RV from "REV REV" to "HOME
HM HM/RV HM HM RV RV RV REV REV REV
B D
AND EFAULT
BC Band
SW Band
50 MHz Ham Band
FM BC Band
Air Band
144 MHz Ham Band
VHF-TV Band
Action Band 1
430 MHz Ham Band
UHF-TV Band
Action Band 2
M C
EMORY HANNEL
HOME," if it is not
HOME HOME HOME
H C F
OME HANNEL REQUENCY
0.540 MHz
1.800 MHz
30.000 MHz
88.000 MHz
108.000 MHz
144.000 MHz
174.000 MHz
230.000 MHz
430.000 MHz
470.000 MHz
860.000 MHz
)
39