Yaesu VX-6E Operating Manual page 100

( M
S
ET ENU
Set Mode Item 42 [ OPN.MSG ]
Function: Selects the Opening Message that appears when the radio is powered on.
Available Values: DC/MSG/OFF
Default: DC
DC: DC supply voltage
MSG: Set by user. See below.
OFF: No Opening Message
Here's how to program the Opening Message:
1. Set this Set Mode Item to "MSG
2. Press the [ MODE ( SPS ) SQ TYP ] key momentarily to enable programming of the
opening message. You will notice the first character entry's location blinking.
3. Rotate the DIAL knob to select the first letter/number of the message, then press the
[ MODE ( SPS ) SQ TYP ] key momentarily to save the first letter/number and move
on to the next character.
4. Repeat the previous step as necessary to complete the message (up to six characters).
5. If you make a mistake, press the [ BAND ( SCN ) BND DN ] key to back-space the
cursor; now re-enter the correct letter/number.
6. When you have entered the desired opening message, press the [ 0 ( SET )] key mo-
mentarily to confirm the message, then press the PTT key to save the settings and exit
to normal operation.
Set Mode Item 43 [ PAGER ]
Function: Enables/disables the Enhanced CTCSS Paging & Code Squelch function.
Available Values: OFF/ON
Default: OFF
Set Mode Item 44 [ PAG.ABK ]
Function: Enables/disables the Answer Back function of the Enhanced CTCSS Paging &
Code Squelch.
Available Values: OFF/ON
Default: OFF
Set Mode Item 45 [ PAG.CDR ]
Function: Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 60 for details.
Set Mode Item 46 [ PAG.CDT ]
Function: Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 60 for details.
98
) M
ODE
MSG." MSG MSG
MSG
VX-6E O
PERATING
M
ANUAL