Am Aircraft Reception; Fm Broadcast/Tv Audio Reception - Yaesu VX-6E Operating Manual

Reception of AM signals in the aeronautical band (108-137 MHz) is similar to that de-
scribed in the previous section.
1. Press the [ BAND ( SCN ) BND DN ] key (or press the [ F/W ] key, followed by the
[ BAND ( SCN ) BND DN ] key) (repetitively, if necessary), until
you see a frequency in the aeronautical band.
2. Rotate the DIAL to tune across the aeronautical band.
3. You may also use the keypad to enter frequencies directly. Remember that frequen-
cies quoted by aircraft operators may be abbreviated, and that the "5" at the end of a
frequency may be dropped. Since aeronautical channels are assigned in 25-kHz steps,
therefore, a frequency announced as "thirty-two, forty-two" corresponds to an oper-
ating frequency of 132.425 MHz.
FM B
The VX-6E also includes provision for reception in the FM broadcast band, utilizing a
wide-bandwidth filter which provides excellent fidelity.
To Activate FM Broadcast Reception
1. Press the [ BAND ( SCN ) BND DN ] key (or press the [ F/W ] key,
followed by the [ BAND ( SCN ) BND DN ] key) repetitively un-
til a frequency in the FM broadcast band appears on the display.
The total frequency range included in the "FM" band is 88-108 MHz.
2. Rotate the DIAL to select the desired station. The default synthesizer steps for the W-
FM mode are 100 kHz/step.
To Activate VHF or UHF TV Audio Reception
1. Press the [ BAND ( SCN ) BND DN ] key (or press the [ F/W ] key,
followed by the [ BAND ( SCN ) BND DN ] key) repetitively un-
til a frequency in the VHF or UHF TV bands appears on the
LCD.
2. Rotate the DIAL to select the desired station.
Remember that the Wide-FM Squelch setting may be made independently
from the Narrow-FM setting, adjust the Wide-FM Squelch setting by press-
ing the [F/W] key, followed by the MONI switch while in the Wide-FM mode.
See page 13 for details.
VX-6E O
PERATING
AM A
IRCRAFT
/TV A
ROADCAST
M
ANUAL
R
ECEPTION
R
UDIO ECEPTION
O
PERATION
VHF TV Band
UHF TV Band
19