Home Channel Memory - Yaesu FT-8800R Operating Manual

R
EGULAR

HOME Channel Memory

A special one-touch "HOME" channel is available (one for each of the five operating bands:
see page 21), to allow quick recall of a favorite operating frequency on each band. Memory
storage is simple to accomplish:
1. Select the desired frequency, while operating in the VFO mode on the "Main" band. Be
sure to set up any desired CTCSS or DCS tones, as well as any desired repeater offset.
The power level may also be set at this time, if you wish to store it.
2. Press and hold in the [ SET ] key for 1/2 second. A memory number will appear (blink-
ing) on the display.
3. While the memory channel number is blinking, just press the "Main" [ H/M ] key. The
frequency and other data (if any) will now be stored in the special HOME channel
register.
4. You may repeat this process on the other operating bands.
5. To recall the HOME channel, just press the [ H/M ] key while operating either in the VFO
or MR mode.
FT-8800R Operating Manual
M
M C
EMORY HANNEL
O
EMORY
O
PERATION
PERATION
35