Memory Offset Tuning - Yaesu VX-6E Operating Manual

Once you have recalled a particular memory channel, you may easily tune off that chan-
nel, as though you were in the "VFO" mode.
1. With the VX-6E in the "MR" (Memory Recall) mode, select the
desired memory channel.
2. Press the [ F/W ] key, then press the [ V/M ( DW ) MT ] key to acti-
vate the "Memory Tuning" feature. The Memory Channel num-
ber will be replaced by "
meric Tag displayed on the memory channel, the display will
automatically revert to display of the operating frequency, so
you can navigate without having to enter the Menu to change
the display configuration.
3. Rotate the DIAL knob, as desired, to tune to a new frequency.
The synthesizer steps selected for VFO operation on the current
band will be the steps used during Memory Tuning.
4. If you wish to return to the original memory frequency, just press the [ V/M ( DW ) MT ]
key momentarily. The display will revert to display of the alpha-numeric Tag (if any)
that may have originally appeared on the LCD.
5. If you wish to store a new frequency set during Memory Tuning, just press and hold
in the [ F/W ] key for one second, per normal memory storage procedure. The micro-
processor will automatically set itself to the next-available clear memory location,
and you then press [ F/W ] again to lock in the new frequency.
1) If you want to replace the original memory contents with those of the new
frequency, be sure to rotate the DIAL knob to the original memory channel
number!
2) Any required CTCSS/DCS changes, or repeater offset modifications, must be done
before storing the data into the new (or original) memory channel location.
VX-6E O
PERATING
M M
EMORY
M O
EMORY
tun tun tun tun tun ." And if you have an alpha-nu-
M
ANUAL
ODE ( R
EGULAR
T
FFSET UNING
M C
EMORY HANNEL
)
37