Disengage The Clutch - Chamberlain SL600 Installation Manual

INSTALLATION

Disengage the Clutch

Disengaged the clutch for the following reasons:
• To open or close the gate manually in case of power failure.
• To reset the functions.
• The operator needs maintenance.
1. Pull out the key guard.
2. Turn the release key, then pull manual release lever down to disengage the clutch.
3. To re-engage the clutch, return the manual release lever to the upright position making sure the
housing and release lever tabs are aligned and turn the release key to the lock position.
NOTE: Remember to lock the clutch after cover is in place and all operations are fi nished.
Key guard
Release key
12
Disengage
the clutch
Lock the clutch
Release key