Install The Operator - Chamberlain SL600 Installation Manual

INSTALLATION

Install the Operator

Make sure the sliding gate can be moved smoothly before installation. There must be a clearance
between rack and gear as shown, or the gate movement may be effected.
Gear
Rack
110 mm
Ground level
Limit Switch Bracket Installation
Attach the limit switch bracket to the rack with adjusting screws. If the limit switch bracket is installed
incorrectly, the gate cannot learn the travel limit.
CORRECT INSTALLATION
Limit switch bracket
Rack
Adjusting screw
2-3 mm
Limit switch
bracket
Adjust the limit
switch bracket
11
INCORRECT INSTALLATION
Operator
Gate
Limit switch
bracket
Limit switch
spring
Rack
Gear
Wheel
Mounting plate
Track