Wireless Advanced - TP-Link Archer C50 User Manual

The filtering rules that configured should be similar to the following list:
4.7.5

Wireless Advanced

Choose menu "Wireless → Wireless Advanced", you can configure the advanced settings of
your wireless network.
Transmit Power - Here you can specify the transmit power of router. You can select High,

Middle or Low which you would like. High is the default setting and is recommended.
Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.

The beacons are the packets sent by the router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet

is larger than the specified RTS Threshold size, the router will send RTS frames to a
particular receiving station and negotiate the sending of a data frame. The default value is
2346.
Fragmentation Threshold - This value is the maximum size determining whether packets

will be fragmented. Setting the Fragmentation Threshold too low may result in poor network
Archer C50
Figure 4-41 Wireless Advanced
- 61 -
AC1200 Wireless Dual Band Router