TP-Link Archer C50 User Manual page 30

your country or region is not listed, please contact your local government agency for
assistance.

Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S.
region only.
Security

 Enable Security (WPA-PSK/WPA2-PSK) – It's selected by default, with the
default PSK password the same as the default PIN code.
 Disable Wireless Security - The wireless security function can be enabled or
disabled. If disabled, the wireless stations will be able to connect the router without
encryption.
The above settings are only for basic wireless parameters. For advanced settings, please
check "More Advanced Wireless Settings", and then you can set the following parameters.
Band - This field displayed the operating frequency being configured.

Mode - This field determines the wireless mode which the router works on.

 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.
 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Channel Width - Select any channel width from the drop-down list. The default setting

is "Auto", which can adjust the channel width for your clients automatically.
Channel - This field determines which operating frequency will be used. It is not

necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select "Auto", then the AP will select the best
channel automatically.
7. Configure the basic parameters for 5GHz wireless network in the following screen as shown
in Figure 3-14, and then click Next.
Archer C50 AC1200 Wireless Dual Band Router
- 19 -