Basic Security - TP-Link Archer C50 User Manual

There are four submenus under the Security menu: Basic Security, Advanced Security, Local
Management and Remote Management. (as shown in Figure 4-68). Click any of them, and you
will be able to configure the corresponding functions.
4.13.1

Basic Security

Choose menu "Security → Basic Security", and then you can configure the basic security in the
screen as shown in Figure 4-69.
Firewall - A firewall protects your network from the outside world. Here you can enable or

disable the router's firewall.
SPI Firewall - SPI (Stateful Packet Inspection, also known as dynamic packet filtering)

helps to prevent cyber attacks by tracking more state per session. It validates that the
traffic passing through the session conforms to the protocol. SPI Firewall is enabled by
factory default. If you want all the computers on the LAN exposed to the outside world,
you can disable it.
VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using VPN

protocols to pass through the router.
Archer C50
Figure 4-69 Basic Security
- 82 -
AC1200 Wireless Dual Band Router