TP-Link Archer C50 User Manual page 62

Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of

up to 32 characters. The same name must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXX_5G. This value is case-sensitive. For example, TEST is NOT the same as
test.
Region - Select your region from the drop-down list. This field specifies the region where the

wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the Save button, then the
Note Dialog appears. Click OK.

Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region
only.
Archer C50
Figure 4-29 Wireless Settings – 5GHz
Note Dialog
- 51 -
AC1200 Wireless Dual Band Router