Wireless Mac Filtering - TP-Link Archer C50 User Manual

Be sure to click the Save button to save your settings on this page.
4.7.4

Wireless MAC Filtering

Choose menu "Wireless → MAC Filtering", you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in
Figure 4-24.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address - The wireless station's MAC address that you want to filter.

Status - The status of this entry, either Enabled or Disabled.

Host- The host network for the filetring rules.

Description - A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-25:
Figure 4-40 Add or Modify Wireless MAC Address Filtering entry
Archer C50
Figure 4-39 Wireless MAC Filtering
- 59 -
AC1200 Wireless Dual Band Router