System Will Not Passively Arm Until It Is Remotely Armed And Then Disarmed - Clifford Matrix +1 Installation Manual

System will not passively arm until it is remotely armed and then
disarmed.
• Are the door inputs connected? Is a blue wire connected to the door trigger
wire in the vehicle? Either the green H1/5 or the violet H1/7 should be
used instead.
Door input does not respond with the progressive trigger, but with
immediate full alarm.
• What zone does the LED indicate? If the LED indicates that the impact
sensor caused the trigger, the sensor may be detecting the door opening.
Reducing the sensitivity or relocating the sensor can often solve this
problem. If the LED indicates that the door caused the trigger, you may
have programmed the progressive door trigger off. (See Feature 2-4 in the
Feature Descriptions section of this guide.)
The Valet button doesn't work.
• Is it plugged into the correct socket? Check the System Features Learn
Routine for the programmed Valet pulse count.
Status LED doesn't work.
• Make sure that it is plugged in. (See
guide.) Is the LED plugged into the correct socket?
36
Plug-In Harnesses section of this
© 20 0 8 D i re cte d E l ec tro n i cs- Al l ri g ht s res e r v e d.