Multi-Level Security Arming - Clifford Matrix +1 Installation Manual

4. Press and release the Valet/Program switch within 5 seconds.
The LED will flash in groups indicating the last two zones that
triggered the unit. The LED will flash for one minute or until
the ignition is turned off.
NOTE: The Warning Zone triggers are not stored to memory and will not be
reported.

multi-Level Security Arming

Multi-Level Security arming allows the operator to select which inputs and
sensors are active during a particular arming cycle. For a full description of
Multi-Level Security Arming operation for testing purposes refer to the owner's
manual.
33
© 20 0 8 D i re cte d E l ec tro n i cs- Al l ri g ht s res e r v e d.