Clifford Matrix +1 Installation Manual page 19

4.
5.
6.
• Once a feature is programmed:
• Other features can be programmed within the same menu.
• Another menu can be selected.
• The learn routine can be exited if programming is complete.
19
Select a Feature.
switch the number of times corresponding to the feature
you wish to change. For example, to access the third
feature, press and release the switch three times. Then
press the switch once more and HOLD it. The siren
will chirp the number of times equal to the step you
have accessed.
Program the Feature.
Program switch, you can toggle the feature on and off
using the remote transmitter. Pressing
the one chirp setting. Pressing
select the two chirp setting.
(See Systems Features menus)
NOTE: The Valet pulse count feature (2-5) and the
Channel three timed output (2-9) have five possible
settings each. Pressing
two-chirp settings.
Release the Valet/Program Switch.
© 20 0 8 D i re cte d E l ec tro n i cs- Al l ri g ht s res e r v e d.
Press and release the Valet/Program
While holding the Valet/
�������
will toggle through all the
�������
will select
will
�������