Table of Contents
Advertisement
UPDaTInG.THE.SOFTWaRE
To keep you up-to-date with the latest
developments in digital television, new features may
be made available to your set-top box in the form of
a software update .
You should regularly check for a software update, so
you will need to remember the name of the satellite
from which your dish receives signals .
note: software updates may be available from
the following satellites; others may be added
at a later date:
•
Astra 1 (19 . 2 ° East)
•
Hotbird (13 ° East)
•
Nilesat (7 ° West)
To be informed about future software updates, as
soon as they become available, please register your
details at: www.pacemicro.com/ds810xe
USInG.THE.MEnUS.TO.UPDaTE.THE.
SOFTWaRE
Press the menu button to display the Main menu,
highlight 'Setup menu' and press oK, then highlight
'Software update' and press oK .
note: If the satellite is one of the three listed
above, there is no need to change any other
settings on the software update screen.
uPDAtInG tHe soFtWARe
If, in future, you are able to use a satellite that is not
listed above, you may need to change one or more
of these settings:
•
If you have a dish positioner, you can select the
satellite you want . Use the U D buttons to
highlight the satellite setting, then press the
L R buttons until the one you want to scan is
displayed .
•
To change any of the Frequencies or symbol
rates or PID, first use the U D buttons to
highlight the one you want to edit . Then use
the L R buttons to underline each digit, and
the number buttons to enter digits .
•
To change a highlighted Polarisation, use the
L R buttons until the polarisation you want is
displayed .
Press oK to start the software update process .
If there is no update available, you will see a
message to tell you .
If there is an update available, press oK to accept it .
The update will take about 30 minutes to complete .
CAutIon! Do not interrupt the update
process. Do not switch off your set top box. If
the process is interrupted, your set-top box
will attempt to reload the software from the
beginning when it is next switched on.
After a successful update, your set-top box will
restart using its new software .
For the latest information, please visit:
www.pacemicro.com/ds810xe
33
Advertisement
Table of Contents
