Network Scan - Pace DS810 Manual

GettInG stARteD
nETWORK.SCan
The Network scan screen appears, with the type of
scan highlighted in yellow . If you need to go back to
the previous screen, press exIt .
Press the L R buttons until the type of scan
you want (Fast scan, nIt scan, exhaustive or
Frequency) is displayed .
If you have a dish positioner, you can select the
satellite you want . Use the U D buttons to
highlight the satellite setting, then press the L R
buttons until the one you want to scan is displayed .
To change any of the Frequencies or symbol
rates, first use the U D buttons to highlight the
one you want to edit . Then use the L R buttons to
underline each digit, and the number buttons to
enter digits .
To change a highlighted Polarisation, use the
L R buttons until the polarisation you want is
displayed .
To start the scan, using the values you have entered,
press the oK button .
When the scan is complete, the network scan
screen appears again. You can now choose
new values and scan again to find more
channels, for example from a different satellite.
Alternatively, press menu to quit scanning for
channels and begin using your set-top box.
3