Table of Contents
Advertisement
DISPLaYInG.THE.SETUP.MEnU
Press the menu button to display the Main menu,
then press oK to display the Setup menu .
You use the Setup menu in the same way as the
Main menu . Press the U D buttons to move the
highlighting up or down, and press oK to select
an item . The selected item's screen appears on the
right-hand side .
To remove the Setup menu and return to the Main
menu, first make sure the highlight is in the list of
items (not in a settings screen) then press the exIt
button .
VIEWInG.CI.MODULE.InFORMaTIOn
You may need to view CI module Information, for
example if you are asked for this information by a
Customer Advisor .
From the Setup menu, highlight 'CI-module' .
To display more information about an inserted CI
module, press oK .
VIEWInG.SYSTEM.InFORMaTIOn
You may need to view System Information, which
gives information about your set-top box, for
example if a Customer Advisor asks you to .
From the Setup menu (see page 24), highlight
'System' , then press oK .
usInG tHe setuP menu
To display information about the software version
number, press the blue button . To remove this
screen and redisplay the System screen, press the
blue button again .
To return to the Setup menu, press exIt .
UPDaTInG.THE.SOFTWaRE
Please see page 33 .
CHanGInG.anTEnna.SETTInGS
On this screen you can select the method you have
used to connect your set-top box to your satellite
dish(es) .
From the Setup menu (see page 24), highlight
'Antenna' , then press oK .
Use U D to highlight the setting you want, then
press oK .
If you do not want to save your changes, press the
exIt button .
25
Advertisement
Table of Contents
