Pace DS810 Manual page 2

ELECTRICAL INFORMATION (UK AND EIRE ONLY)
Mains plug and its fuse
The supplied mains plug is a non-rewireable type.
If you need to replace the fuse, you must use an
ASTA- or BSI-approved BS 1362 fuse, rated at 3 A and
marked as shown below.
or
The plug has its fuse beneath a fuse cover on its
face. Use a screwdriver to lever off the fuse cover,
replace the fuse with a new one and refit its cover.
Never use a plug if its fuse cover is missing.
AM
The fuse is inside the rewireable plug. Use a
screwdriver to remove the plug's back cover. Never
put the plug into the mains socket when its cover is
removed. Lever out the fuse and replace it with a
new one. Replace the plug's back cover.
E
N
L
FUSE of correct value
WARNING
If the supplied mains plug is not suitable for
your mains socket-outlet, DO NOT plug it in.
Remove its fuse and then cut the plug off the
lead. Destroy the severed plug immediately
to avoid the shock hazard which would exist if
this were to be plugged into a mains socket.
Fit an appropriate mains plug on the lead.
If this plug contains a fuse, it should be as
described left. If you are using a non-fused
plug, an external fuse must not exceed 5 A.