To Retrieve Each Parameters - Panasonic Workio DP-180 Operating Instructions Manual

■ To Retrieve Each Parameters

To retrieve the existing parameters, send a plain text email to the your machine's email address with the following
command in the "Subject" line:
• #get parameters(password)#
• #get abbr(password)#
• #get jnl(password)#
: where the "password" is the Remote Password programmed in your machine's User Parameters (i.e.
1234567890). For security, always input a Remote Password in the User Parameters. If it was not
programmed, signify with "()" (i.e. #get parameters()#).
Make sure that the CC..., Bcc... lines and the body of the email message is Blank.
[Ex: Internet Parameters]
(1) To
From
Subject
Using Email to Retrieve the Journal
The Journal will be send back to the originating station's email address.
After receiving the journal, use a fixed width font (i.e. Courier), in order to align the received journal's contents on the PC.
A separate email message is sent by your machine, an "Internet Fax Return Receipt" to the Manager's email address
programmed in the User Parameters, informing of the Journal transfer.
150
Setting Your Machine
Programming or Retrieving Parameters via Email
(
: Your machine's email address.
: This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Internet
Parameters and for error message notification.
(Can be programmed with the configuration tool of your email program.)
: To Retrieve data, type : #get parameters(password)#
: To retrieve the Internet Parameters
:
To retrieve the Auto Dialler (Phone Book Dialler)
:
To retrieve the Journal (Transaction Journal)
(1)
)
#get abbr(password)#
#get jnl(password)#