Panasonic Workio DP-180 Operating Instructions Manual page 142

No.
053 SUB ADDRESS
054 FAX FORWARD
056 COVER SHEET
057 DESTINATION CODE
077 DEPARTMENT CODE
082 QUICK MEMORY XMT
095 DUPLEX PRINT
097 SPECIAL TRAY
099 MEMORY SIZE
(Flash Memory)
118 FAX FUNCTION
119 QWERTY KEYBOARD
120 sFINE RESOLUTION
140 LAN RELAY XMT
142
(a.k.a. LAN RELAY
STATION on UF-770i)
142
Setting Your Machine
Fax Parameters
Setting
Parameter
Number
PASSWORD
1
2
1
(HOME)
2
1
2
1
2
1
2
1
No.1 - 2
2
3
-
1
DETECT
2
3
4
5
6
1
2
1
2
1
REQUEST
2
RELAY XMT 1
2
Setting
(----) Setting a 20-digit password for secured sub-address
communication.
Invalid Selecting whether the machine performs Fax Forwarding to
the specified destination.
Valid
Off Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 80)
On
Selecting the destination code when installing your machine.
Invalid Selecting whether the machine performs the Department
Code operation.
Valid
Invalid Selecting whether the machine performs Quick Memory
Transmission.
Valid
Invalid : Stores all documents into memory first before
dialling the telephone number.
Valid : Starts dialling the telephone number immediately
after storing the first page.
Invalid Selecting whether the machine performs duplex print when
receiving the document via G3 Fax or Internet Fax.
Valid
None Select a Special Tray that will not be used for printing
received faxes (Tray 1 or 2). One Tray must always be
Tray 1
available for receiving Faxes. This setting is only available
Tray 2
when the 2nd Paper Feed Module Option is installed.
- Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
Invalid Setting the number of digits required to determine the
entered number is a Fax Telephone number.
4-Digits
Upon detecting the specified number of digits, the machine
5-Digits
will automatically switch to the FAX Mode when it is in the
Copier Mode.
6-Digits
7-Digits
8-Digits
One-Touch Selecting whether the QWERTY Keyboard functions as a
One-Touch Dialling Keys or as Quick Name Search Keys of
Quick Name
the station name.
Search
One-Touch
Quick Name Search
400 dpi Selecting the S-Fine default Resolution for Monochrome.
(S-Fine functions as 300 dpi when sending in Colour)
600 dpi
Invalid Selecting whether the machine performs LAN Relay XMT
Request.
Valid
Invalid Selecting whether the machine accepts and performs G3
relayed transmission. (Relay Station Functions)
Valid
Comments
: Each letter key is assigned with an Email
Address or a Telephone Number for quick
dialling.
: Entering the letter(s) of the station name for
quick name search of the programmed
station and quick dialling.