Panasonic Workio DP-180 Operating Instructions Manual page 143

No. Parameter
143 RELAY XMT REPORT
144 EMAIL CHARACTER
SET
145 SENDER SELECTION
146 POP TIMER
147 AUTO POP RCV
148 DELETE POP RCV
EMAIL
149 DELETE POP ERROR
EMAIL
150 IFAX RETURN RECEIPT
151 EMAIL HEADER
FORMAT
152 SUB-ADDRESS
ROUTING
153 TSI ROUTING
154 ROUTING HEADER
FORMAT
155 PRINT ROUTED
DOCUMENT
156 PRINT FORWARDED
DOCUMENT
157 TRANSACTION
JOURNAL
Continued on the next page...
Setting
Setting
Number
1 Off Setting how the COMM. Journal for relayed transmission is
sent to the originator.
2 Always
Off
3 Inc. Only
Always
Inc. Only : Send only if communication has failed.
1 Japanese Selecting the Character Set when receiving or sending email
text.
2 English
1 Invalid Selecting a pre-programmed sender's name and email
address before each transmission.
2 Valid
---- 0 to 60 min. Setting the time interval for the machine to check for email
on the POP Server.
(0 = Does not check the POP Server for email.)
1 Invalid Selecting whether the machine automatically downloads an
email from the POP Server.
2 Valid
1 Invalid Selecting whether the email will be deleted automatically
after retrieval from the POP Server.
2 Valid
1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
1 Invalid Selecting whether to send a return receipt when receiving
from another Panasonic Internet Fax.
2 Valid
1 All Selecting the header information to print when an email is
received. (Normally used for Troubleshooting. It shows the
2 Subject/
path of the email transmission before arriving at your
From/To
machine.)
3 Off
1 Invalid Selecting whether to automatically route a received fax or
email using ITU-T sub-address.
2 Valid
1 Invalid Selecting whether to route a received fax to a telephone
number or an email address pre-programmed in the Phone
2 Valid
Book using the originating fax's Numeric ID (TSI frame
information).
1 Originator Selecting the type of email header to be included in the
"From" field of each routed faxes.
2 Relay
Originator
Station
Relay Station : The routing station's email address will
1 Inc. Only Selecting whether a received fax to be routed is always
printed or only when the routing operation fails.
2 Always
1 Inc. Only Selecting whether a memory received fax or email to be
forwarded is always printed or only when forwarding is
2 Always
incomplete.
1 Invalid Selecting whether the machine sends a transaction journal
to the pre-programmed email address.
2 Valid
Comments
: Don't send.
: Always send.
: The originating fax machine's TSI will
appear in the "From" field of the routed
email.
appear in the "From" field of the routed
email.
143