Panasonic Workio DP-180 Operating Instructions Manual page 113

No. 153 TSI ROUTING:
Set this parameter to perform a Numeric ID (TSI frame information) query within its auto dialler and to route the received
document(s) to the corresponding stations email address(es) or telephone number(s).
No. 154 ROUTE HEADER FMT:
Use this parameter to select the type of email header to be included in the "From" field of each routed faxes.
(Default setting is "Originator")
Originator : The originating fax machine's TSI will appear in the "From" field of the routed email.
Relay Station : The routing station's email address will appear in the "From" field of the routed email.
No. 155 PRINT ROUTED DOC:
Set this parameter to select whether a received fax to be routed is always printed on your machine or only when the
routing operation fails.
4
ONE-TOUCH< >
PRESS ONE-TOUCH
Ex:
Q 01
To change the input
mode of the
address email.
8
ROUTING: TSI
Enter the Numeric ID (TSI)
(up to 20 digits), then press
.
SET
5a
<01>
ENTER TEL. NO.
5b
<01>
ENTER EMAIL ADDRESS
9
ONE-TOUCH<
❚
PRESS ONE-TOUCH
To return to standby, press
Enter the telephone number
(up to 36 digits including
pauses and spaces), then
press
SET
Ex: 55512342762
Enter an email address (up to
60 characters), then press
.
SET
Ex: abc@panasonic.com
>
.
STOP
.
6a
6b
113