Panasonic Workio DP-180 Operating Instructions Manual page 141

No. Parameter
024 PRINT REDUCTION
025 REDUCTION RATIO
026 POLLING PASSWORD
027 POLLED FILE SAVE
028 STAMP AT MEMORY
XMT
030 DRD SERVICE
031 INCOMPLETE FILE
SAVE
037 RECEIVE TO MEMORY
038 ACCESS CODE
039 PIN CODE ACCESS
042 CONF. POLLED FILE
SAVE
043 PASSWORD-XMT
044 PASSWORD-RCV
046 SELECT RCV
048 TELEPHONE LINE
049 PSTN ACCESS CODE
052 DIAGNOSTIC
PASSWORD
Continued on the next page...
Setting
Setting
Number
1 Fixed Selecting print reduction mode.
Fixed : Reduce received document according to setting of
2 Auto
Auto : Reduce received document according to the length
70 70% Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print reduction
---- ----
is selected on Fax Parameter No. 24.
100 100%
(----) Setting a 4-digit password for secured polling.
1 Invalid Selecting whether the machine retains the polled document
in memory even after the document is polled once.
2 Valid
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
2 Valid
(depending on the Stamp setting on the Control Panel.)
1 Invalid Selects whether the DRD Service is used (if available). If
this parameter is set to "Valid", your machine detects the
2 Valid
specified ring pattern only to receive a document
automatically.
1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2 Valid
(----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown on
the LCD display.
(----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 146)
1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
1 Invalid Selecting whether the machine saves the confidential polled
file even after the file is polled once.
2 Valid
1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
2 On
receiving station when transmitting.
1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
2 On
transmitting station when receiving.
1 Invalid Selecting whether the machine performs selective
reception. (See page 90)
2 Valid
1 PSTN Selecting the type of line connected.
2 PBX
(----) Setting PSTN Access Code. (max. 4 digits)
(----) Setting the password for Remote Diagnostic Mode. Please
ask your Panasonic Authorized Dealer for details.
Comments
Fax Parameter No. 25.
of received documents.
141