Panasonic Workio DP-180 Operating Instructions Manual page 171

Info.
Code
436/490 Received data has too many errors.
456 • Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing received document.
• Unit was requested to relay a document.
492/493/ Communication error occurred while receiving.
494
495 Telephone line disconnected.
501/502/ Communication error occurred using the internal V.34
503/504 Modem.
540/541/ Communication error occurred while transmitting.
542/
543/544
550 Telephone line disconnected.
552/553/ Communication error occurred while receiving.
554/555
580 Sub-address transmission to a unit that has no Sub-
address function.
581 Sub-address Password transmission to a unit that has
no Password Sub-address function.
623 No document loaded on the ADF.
630 Redial was not successful due to a busy line.
631 During dialling, STOP was pressed.
634 Redial was not successful due to no response from
the called station or wrong number dialled.
Note: If busy tone was not detected, the machine will
only redial once.
638 Power failure occurred during the communication.
711 Incorrect LDAP settings.
712 Incorrect email address.
714 Cannot Log on to the LAN.
Continued on the next page...
Meaning Possible Action
Check with the other party.
1. Print a File List and check the contents.
2. Wait until unit finishes printing.
Check with the other party.
Check with the other party.
Check with the other party.
1. Reload the document and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Check the remote station.
Reload the document and send again.
Reload the document and send again.
Reload the document and send again.
Check the telephone number and send again.
Check the power cord and plug.
Check the LDAP Server Name, LDAP Login
Name, LDAP password, LDAP Search Base.
Check the email address and send again.
Check the IP Address of the SMTP Server
with the Network Administrator.
Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.
Page
--
98
--
--
--
--
--
--
78
78
--
--
--
--
--
52
53
--
--
171