Table of Contents
Advertisement
Checking the programme
2. Select a disc number and track number as explained above.
Each time the CD MEMORY button is pressed in the stop mode, the
To change a selection:
programmed details sequentially appear on the display.
1. In the stop mode, press the CD MEMORY button repeatedly until the
selection to be replaced is displayed.
Changing a programme
2. Select a disc number and track number as explained above.
To add a new selection to a programme:
Note:
1. In the stop mode, press the CD MEMORY button repeatedly until
Programmed details cannot be partially deleted or inserted.
".. ..-
" is displayed.
LISTENING TO TAPES
Deck A is for playback only; deck B is for both playback and recording.
1.
2.
3.
4.
5.
6.
7,
Select "TAPE".
Press the EJECT button to open the cassette holder.
Load the cassette(s).
To load, place the tape with its exposed end at the bottom. Afler the
tape has been loaded, push the cassette holder back into position.
The A or B DECK indicator lights.
Set the DOLBY NR button to ON or OFF according to whether the tape
has been recorded with the Dolby NR system or not.
Select deck A or deck B by pressing the DECK button if required. (If
only one cassette is loaded, deck A or deck B will be selected
automatically.)
Press the b or a
button to begin playback. The b or ~
indicator
lights.
Press the
button to stop playback at any time.
When the e~d of the tape has'been reached, automatic stop or reverse
will be activated.
Types of usable tapes
The type of tape used is automatically identified by the system since
decks A and B both employ an auto tape selection system. The following
types of tape can be used with this system.
Normal
Cr02
Note:
Cr02 tapes without sensing holes cannot be used since they cannot
be identified by the auto tape selector.
Endless tapes cannot be used.
Do not use C-120 tapes. They may jam in the mechanism.
Auto reverse
[n both decks A and B, tapes can be played back in the following 3 ways
using the REVERSE lever.
—.
—.
For listening to one side of the tape only.
2'
For listening to both sides of the tape in succession.
If playback has been started from the reverse side, only the reverse
side will be played back.
rJ
:
For listening repeatedly to both sides of the tape.
Fast forward and rewind
press the m
or +
REW/FFWD button. The D or d indicator blinks.
When the tape has been wound to the end, the deck stops automatically.
Relay playback (continuous
playback on
decks
A and
B)
' Load the cassettes into both decks A and B.
1.
2.
.
5.
4.
Set the REVERSE lever to D
.
Select deck A or deck B by pressing the DECK button if required.
Press the p or Q button.
Relay playback will continue from deck A (or B) to deck B (or A) until
the
button is pressed.
Deck A forward side -- Deck A reverse side -- Deck B forward side --
Deck B reverse side -- Deck A forward side -----
Dolby NR system
Dolby Noise Reduction circuitry provides superior recording and play-
back results by suppressing tape hiss by up to 10 dB.
Dolby noise reduction manufactured under license from Dolby Laborato-
ries Licensing Corporation.
"DOLBY" and the double-D symbol
DO
are trademarks of Dolby
Laboratories Licensing Corporation.
Note:
During cassette deck operation, if an operating problem occurs, press the
EJECT button and remove the cassette, Reinsert it completely and
resume operation.
-8-
Hide quick links:
Advertisement
Table of Contents
