LISTENING TO TAPES
Deck A is for playback only; deck B is for both playback and recording.
Do not turn the unit off while the tape is running. Otherwise, the pinch roller
may be damaged.
Press the TAPE function button.
Press the WA button to open the cassette holder.
Load the cassette(s).
After the cassette has been loaded, push the cassette holder back into
Set the DOLBY NR button to ON or OFF according to whether the tape
has been recorded with the Dolby NR system or not.
button (deck A or deck B) to begin playback.
Press the WA button to stop playback at any time. Press it again to
remove the cassette.
When the end of the tape has been reached, automatic stop will be
Types of usable tapes
The type of tape used is automatically
identified by the system since decks
A and B both employ an auto tape selection system. The following types
of tape can be used with thrs system.
Cr02 tapes without sensing holes cannot be used since they cannot
be identified by the auto tape selector.
Endless tapes cannot be used.
Do not use C-120 tapes. They may jam in the mechanism.
Press the II button to temporarily stop playback or recording. Press it again
to resume operation.
Fast forward and rewind
Press the F-
When the tape has been wound to the end, the deck stops automatically.
While playing or recording, do not press the F> or << button of the other
deck, or the sound quality may deteriorate.
(From deck A to deck B)
"button of deck A. Deck A playback will begin.
Press the II button of deck B.
button of deck B. Deck B enters the pause mode.
When the tape automatically
stops on deck A, deck B playback will
When the end of the tape has been reached on deck B, automatic stop
will be activated.
Dolby NR system
Dolby Noise Reduction circuitry provides superior recording and playback
results by suppressing
tape hiss by up to 10 dB.
Dolby noise reduction manufactured
under license from Dolby Laborato-
ries Licensing Corporation.
"DOLBY" and the double-D symbol no are trademarks of Dolby Labora-
tories Licensing Corporation.