Download  Print this page

Listening To Tapes - Sanyo DC-F450 Instruction Manual

Hide thumbs

Advertisement

LISTENING TO TAPES
Deck A is for playback only; deck B is for both playback and recording,
I
If a cassette
is loaded,
you can turn the unit on and begin play
immediately
by pressing the E or DECK A ONLY + button.
I
1,
2.
3,
4.
5,
6.
7,
8.
Select "TAPE".
"TAPE"
appears
on the display,
then "TAPE"
is
replaced by the tape mode display.
Press the cassette holder (EJECT portion) to open it.
Load the cassette(s).
MM
DECK A
'
DECK B
'
After loading
the cassette(s),
push the cassette
holder
(EJECT
portion) back into position, The DECK A or DECK B indicator lights.
Set the DOLBY NR button according to whether the tape has been
recorded with the Dolby NR system or not.
With Dolby NR
"no
B NR" appears
Without Dolby NR
"no
B NR" disappears
Select deck A or deck B by pressing the DECK button if required. (If
only one cassette
is loaded,
deck A or deck B will be selected
automatically.)
For deck A: Select the reverse mode with the REVERSE
MODE
button as desired.
Press the
or DECK A ONLY < button to begin playback. "F"
or
" <" appears on the display.
F : For forward play
DECK A ONLY<
: For reverse play (Deck A only)
-
3
Press the
button to stop playback at any time.
When the end of the tape has been reached, automatic stop or reverse
will be activated.
Types of usable tapes
The type of tape used is automatically
identified by the system since decks
A and B both employ an auto tape selection system. The following types
of tape can be used with this system.
Normal
Cr02
Metal (Only for playback)
Note:
-
Cr02/Metal
tapes without sensing holes cannot be used since they
cannot be identified by the auto tape selector.
Endless tapes cannot be used.
Do not use C-120 tapes. They may jam in the mechanism.
Auto reverse (Deck A only)
Press the REVERSE MODE button to select the reverse mode as desired.
=:
For listening to one side of the tape only.
z)
:
For listening to both sides of the tape in succession.
If playback
has been started from the reverse side, only the
reverse side will be played back.
w:
For listening repeatedly to both sides of the tape.
Fast forward and rewind
Press the
-or
<4
button. "F"
or" 4"
blinks.
When the tape has been wound to the end, the deck stops automatically.
Tape counter
Each deck has a counter. The counter of the selected deck appears on the
display and helps you to quickly Iocatethe redorded selection for playback.
:i 302 ']
Both sides of the counter indicate tape movement with rotating graphic
displays.
To reset the tape counter to "000"
In the stop mode, press the DECK button to select the counter to be reset,
then press the
button,
When the tape is automatically rewound during CD computer recording
or tape high-speed dubbing, the counter automatically
resets to "000.
Relay playback (continuous
playback)
1.
Load the cassettes into both decks.
2.
Set the REVERSE
MODE button to =].
3.
Select deck A or deck B by pressing the DECK button if required.
4.
Press the
or DECK A ONLY < button.
Relay playback will continue from deck A (or B) to deck B (or A)
until the
button is pressed.
DECK
A forward
side —
DECK
A reverse
side
DECK
B forward
side
~
When the end of the tape has been reached on deck B, deck B rewinds
the tape automatically.
Dolby NR system
Dolby Noise Reduction circuitry provides superior recording and playback
results by suppressing
tape hiss by up to 10 dB.
Dolby noise reduction manufactured under license from Dolby Laboratories
Licensing Corporation.
"DOLBY"
and the double-D
symbol
no
are trademarks
of Dolby
Laboratories
Licensing Corporation.
m

Advertisement

loading

  Related Manuals for Sanyo DC-F450