Table of Contents
Advertisement
RECORDING
FROM THE TUNER, PHONO OR VIDEO INPUT
1. Tune in the radio station to be recorded, or play a record, video
cassette or video disc.
2. Press the REC PAUSE button. The REC PAUSE indicator lights and
the b or 4
indicator blinks.
When using the remote control, press the
/11 button.
3. Press the REC PAUSE button again or press the b or Q button
whose indicator is blinking.
The recording starts. The P or < indicator remains lit.
To record in the opposite direction to that indicated by the blinking
indicator, press once the button whose indicator is not blinking,
check that the other indicator is now blinking, and press the same
button again.
4. Press the REC PAUSE button to temporarily stop recording. Press the
button again to continue,
5. Press the •l button to stop recording.
When beat interference
is heard
A high-pitched noise called "beat" is sometimes heard during the record-
ing of radio broadcasts.
[n cases like this, set the BEAT CANCEL switch at the rear of the unit to the
position (t or 2) which will reduce the level of the beat noise.
MAINTENANCE
Cleaning the decks A and B heads
To ensure playback and recording with good-quality sound, use cotton
swab to clean the heads, pinch rollers and capstans of the decks after
about evety t O hours of use.
If the dirt persists, soak the swab in a little methylated spirit or head
cleaning fluid and then clean.
Main unit
Use a soft cloth to remove dirl on the main unit.
If the dirt persists, dip a soft cloth into a diluted solution of neutral
detergent, wring it out, wipe away the dirt, and then take up any moisture
with a dry cloth.
Do not use benzene, thinners or alcohol since they will mar the finish of
the surfaces.
Cotton swab
Capstan
I
J
Capstan
Pinch roller
/
Erase head fn DECK B
\
Record/Play head
(Play head in DECK A)
-14-
Hide quick links:
Advertisement
Table of Contents
