Video Status Screen; Button/Remote Status Screen; Battery/Media Status Screen - Sony PXW-X200 Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-X200:
Table of Contents

Advertisement

stereo. With non-stereo settings, the setting of
"Monitor CH" in "Audio Output" of the AUDIO
SET menu is displayed as it is.
CH-1/CH-2/CH-3/CH-4: Audio level meters
The 4-channel audio level meters (2 meters when
using 2-channel settings) and input source are
displayed.
While recording (or standing by to record), the
level of the audio inputs (the EE audio levels) are
displayed. During playback, the audio playback
level is displayed according to the setting of
"Output CH" in "Audio Output" of the AUDIO
SET menu.
If audio is input from the i.LINK (HDV/DV)
connector while displaying thumbnails, while
playback is stopped, or while recording an
external signal, the audio input level is displayed.
In this case, the leftmost channels that are
displayed are CH-1 and CH-2, regardless of the
setting of "Output CH" in "Audio Output" of the
AUDIO SET menu.
Wind Filter
The "On"/"Off" setting of Wind Filter is
displayed to the right of each input source. Wind
Filter settings can be made from "Wind Filter
CH1" to "Wind Filter CH4" in "Audio Input" of
the AUDIO SET menu.

Video Status Screen

Video Format
Video Format: Video format setting
The number of vertical lines, frame rate, and scan
format (i/P) of the video format set in "Format" in
"System" of the OTHERS menu are displayed.
Rec Mode: Recording bit rate
The video format set in "Format" in "System" of
the OTHERS menu is displayed.
3G SDI OUT Level: Data mapping method of the
3G SDI signal
The data mapping method of the 3G SDI signal
set in "3G SDI OUT Level A/B" of the VIDEO
SET menu is displayed.
SDI Output: Output for SDI
The "SDI" setting in "SDI/HDMI/i.LINK I/O
Select" of the VIDEO SET menu is displayed.
HDMI Output: Output for HDMI
The "HDMI" setting in "SDI/HDMI/i.LINK I/O
Select" of the VIDEO SET menu is displayed.
90
Showing the Status Screens
i.LINK I/O: Input and output for i.LINK
The "i.LINK" setting in "SDI/HDMI/i.LINK I/O
Select" of the VIDEO SET menu is displayed.
Down Converter: SD output down-converter
setting
In HD Mode, the "Down Converter" setting
(Squeeze, Letterbox, Edge Crop) of the VIDEO
SET menu is displayed.
In SD Mode, "Edge Crop" is displayed when EC
(Edge Crop) in "Format" in "System" of the
OTHERS menu is selected, and "Squeeze" is
displayed when SQ (Squeeze) in "Format" in
"System" of the OTHERS menu is selected.
23.98P Output: 23.98P output mode
The "23.98P Output" setting (23.98PsF, 59.94i
(2-3 Pull Down)) of the VIDEO SET menu is
displayed.

Button/Remote Status Screen

Assign Button: Assignable button statuses
The functions assigned with the "Assign Button"
of the OTHERS menu to the respective
assignable buttons are displayed.
IR Remote: IR Remote Commander status
The "IR Remote" setting of the OTHERS menu is
displayed.

Battery/Media Status Screen

Battery: Battery charge remaining
The remaining charge level of the mounted
battery pack is displayed.
Charge Count: Repeated charge times
The number of times that the mounted battery
pack has been charged is displayed.
HDD A/HDD B: Battery remaining of PHU-220R
units
When professional hard disk units are connected,
the remaining power levels of the batteries of the
professional hard disk units connected via the
respective card slots are displayed.
Media A/Media B: Remaining space, available
recording time, and estimated service life
(rewriting limit)
The remaining space of the SxS memory cards in
the respective card slots is indicated on the
meters.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents