Connecting With The Wireless Lan Wi-Fi Station Mode - Sony PXW-X200 Operating Instructions Manual

Note
Attach/remove the modem while the camcorder is
turned off.
Connecting
1
Turn the camcorder on.
2
Set "NW&Proxy/USB" (page 114) in
the NETWORK SET menu to
"Network&Proxy."
• When an optional modem compatible to the
camcorder is attached, "Network Mode" in
the NETWORK SET menu is
automatically set to "Modem," then the
camcorder is ready to be connected to the
Internet.
Note
It may take a time (for 30 to 60 seconds) until the
camcorder is in the modem mode. Wait until the
"3G/4G" indication for the network connection
status on the LCD Monitor/EVF screen (page 16) is
turned on.
Connecting with the wireless LAN
Wi-Fi station mode
You can connect the camcorder to the Internet in
the Wi-Fi station mode by attaching the USB
wireless LAN module IFU-WLM3 (supplied),
via an optional 3G/4G/LTE access point or by
tethering to a device.
64 Connecting to the Internet
Computer
Smartphone/
tablet
Access
point
Smartphone/
tablet
Connecting
If the access point or device is compatible with
the WPS function, connect the camcorder to the
Internet by performing procedures of
"Connecting to the access point with the WPS
function" (page 62). If the access point or device
is not compatible with the WPS function, connect
the camcorder to the Internet by performing
procedures of "To connect to the access point in
the station mode without the WPS function"
(page 76).
Before connecting, turn the access point or device
on, and activate its tethering function.
Internet
Internet